1

News

How to care for wigs

How to care for wigs

  • Friday, 29 July 2022
  • 0
  • 57
  • 0

The maintenance of wigs is very important. The hair cover is usually hooked on the gauze helmet with human hair or artificial hair one by one. Because there is no regeneration ability, it should be kept properly, otherwise one will be lost. Wigs will be contaminated with dust and bacteria after being used for a period of time, so they should be washed regularly.

Usual maintenance:

1. Wear wigs every day. Don't throw them away when you take them off. They should be placed on a support.

2. When it is not commonly used, it is received in a plastic bag. The wig should not be exposed to the air for a long time, which is prone to dust or clutter.

3. Clean the wig regularly. It is recommended to clean it once a week. After cleaning, dry it in a ventilated place and dry it automatically.

4. The hair conditioner should be kept bright and lubricated. When cleaning the wig, do not rub it hard, but use the hair conditioner to straighten it gently.

5. Take off your wig at ordinary times, and gently straighten it with a sparse comb to remove dust.

6. Curly hair cannot be combed, but it can be handled gently by hand directly, and the curliness of curly hair will be lost with a comb.

Wash wigs:

When cleaning wigs, we choose to use conditioner instead of shampoo. Because the wig itself will not produce oil, as long as it is not particularly dirty, it can be cleaned well with conditioner, and it can also provide a little nutrition for the wig. The following describes the specific cleaning steps:

Required materials: wig, conditioner, warm water, dry towel, comb.

1. Prepare a basin of warm water, the temperature of which is about 20-30, not too hot, and pour an appropriate amount of conditioner.

2. Comb the wig with a comb.

3. Stir it by hand to make the conditioner fully integrate with water.


4. Put the wig into th water.

5. Gently rub it from the tip of your hair, all the way up.

6. The hairpin at the hair root should also be carefully cleaned.

7. Pour a basin of clean warm water with the same temperature as that just now.

8. Put the wig into water and clean it twice or three times.


9. Put the wig in the middle of the clean hair.

10. Fold the towel over to cover the wig.


11. Turn the other side over and gently press it with your hand to let the towel absorb the excess water.

12. Comb the wig with a comb again, and put it in a cool place to dry in the shade. When storing, put it in a bag and put it in a dry place.

0users like this.

  • Posted on Friday, 29 July 2022

    Hair is the raw material for making wigs: it can be divided into human hair and chemical fiber. The price of human hair is expensive, but its effect. Most of the wigs popular in the domestic market are made of chemical fiber precursor, and there are many varieties of chemical fiber

    Hair is the raw material for making wigs: it can be divided into human hair and chemical fiber. Human hair is expensive, but its effect is the best. Most of the wigs popular in the domestic market are made of chemical fiber precursor, and there are many varieties of chemical fiber.

    Nowadays, more and more people are exposed to wigs, from teenagers to youth, from middle age to old age..... But the fewer people who really understand how wigs are produced, let me share the production process of wigs with you today. Hair is the raw material for making wigs: it can be divided into human hair and chemical fiber. The price of human hair is expensive, but its effect is the best. At present, most of the wigs popular in the domestic market are made of chemical fiber, and there are many varieties of chemical fiber. The chemical fiber used in domestic wigs is generally divided into domestic silk, Korean silk, Japanese silk. The gloss, hand feel, elasticity, thickness and durability of different hair silk are different, Of course, their prices are also very different.

    The first process of making wigs is

    1. Cutting: cutting is to cut the long hair into the length required by the wig for standby.

    2. Hair trimming (hair pulling): both ends of the cut hair are flush. Hair trimming (hair pulling) is to put it on the iron comb to mix the natural range and standard length. If it is color mixing, it is also completed by this process. The usual dark brown is 2/33 color, which is to mix the No. 2 color hair with the No. 33 color hair. The color mixing should be uniform, so that the color will be natural.

    3. Measurement: each wig has a specified weight. Measurement is to weigh the specified hair weight according to the instructions on the wig design drawing, and then tie it with a rubber band for standby.

    4. Hair arranging: the hair arranging machine (as shown in the figure) generally has three heads and a glue box. The measured hair is arranged into a hair curtain through the hair arranging machine, and finally through the rubber wheel (that is, roll the arranged hair curtain with a layer of wig special glue), so that the hair curtain is very firm, and the wig will not fall off

    5. Curtain cutting: the arranged hair curtain is a long one, which will affect the operation of the next shaping process, so curtain cutting is to cut the long hair curtain to not exceed the length of the shaping aluminum tube.

    6. Post treatment: before, the hair was taken out directly from the carton. Post treatment is to wash the hair and soak it in the special wig care solution for 15 minutes to treat it into a very smooth hair feel, and then remove the water.

    Modeling: after cleaning and handling the hair with good hand feel, you can model it. The modeling tools required for modeling are different according to the style of wigs. Generally, aluminum tubes are used, which are large and small, so wigs of different sizes and curvature can be made.

    8. Shaping: why is the curvature of the wig not easy to deform? That is the credit of this process. Shaping is to put the well shaped wig into a high-temperature oven, adjust the temperature suitable for hair shaping, and shape it. Different curl degree requires different setting time. Generally, 60-80 minutes is OK.

    9: Fake skin: fake skin is called scalp, also known as imitation leather. Its color and texture are very close to human skin. High quality wigs will be attached with scalp (special fluffy wigs do not use scalp). This kind of wig gives people a more natural and realistic visual effect.

    10. Gao Zhen: please pay attention, audience friends. From here, we can see the finished wig. The shaped hair curtain and the finished scalp need to be sewn on the wig net cap before they are formed. Here we need to use the high needle machine (as shown in the figure). This process is very important. When sewing, it needs to be sewn completely according to the design drawing. At the same time, high-quality wigs also have high requirements for the technicians who operate this process.

    11. Wig NET hat: it is an independent process, which is divided into many small processes. I won't elaborate here, but I attach pictures for you to have a look.

    12 removing the cap: let's first look at the picture (WIG sewn with high needle). On the contrary, there is a layer of plastic film inside. This plastic film needs to be removed. Before, this layer of film was added to the mesh cap to maintain this arc (that is, the head shape) during high needle sewing. Now that it is sewn, it needs to be removed, so that it can be fully breathable when wearing the wig. O (∩∩) o~, low-quality wigs don't need this process, because the mesh cap sewed with three pieces of mesh cloth is not as breathable as this one.

    13. Trimming and shaping: after removing the hat, we will start trimming and shaping. Different hairstyles have different ways of trimming and shaping.

  • Posted on Friday, 29 July 2022

    Wearing wigs in fact, the material of wigs only needs to be relatively good. Wearing wigs is originally to pursue beauty, but if the wigs are dropped in the middle, it will be very embarrassing. The width of your forehead should be considered before the wig is taken. So how can the wigs be taken? I'll teach you the following


    Seven steps to correctly wear a wig:

    1. First wrap your hair and fix it with a clip, and clean it.

    2. Then separate the bangs and the hair on both sides, and tie the remaining hair into a ponytail with a rubber band

    3. Then take the wig from the front to the back, hold the front end with your forehead, and then pull the wig back with both hands to cover all your hair.

    4. Then sort out the broken hair and check it, and put the exposed broken hair into it.

    5. Before and after combing the wig, adjust the wig, especially the ear position, and then comb it with a comb.

    6. If you want to be more natural, you can mix up your hair and spray it with hair gel, and then grab your hair with your hands.

    7. Put the wig on your head, adjust the height appropriately, and trim it to the appropriate length. If you can't take care of it yourself, it will be more realistic to go to the barber's to trim the wig.


    Precautions for wearing wigs:

    1. Try not to be close to high temperature, because the wig is not resistant to high temperature due to the material.

    2. The wig cannot be dyed. If it needs to be trimmed, please ask a professional stylist to trim and arrange the hair.

    3. Wigs are usually washed once every 1-2 months, which can be worn according to the frequency of mm.

    4. Wash with cold water or warm water. It's OK to use general shampoo when washing. It can be combined with general conditioner.

    5. The cleaned wig should not be dried by high-temperature air such as a hair dryer. The excess water on the wig should be gently absorbed by a dry towel and then placed in a ventilated place to avoid damage to the wig caused by direct sunlight.

  • Posted on Friday, 29 July 2022


    Wearing a wig is also learned, wearing a good half the effort, wearing not to make a fool of yourself. So I will explain the wearing of wigs, washing and maintenance knowledge, so that you can learn how to make wigs better for you from the beginning.

     

    Wig selection:

    1. Choose a thin, breathable liner for your wig.

    2. The size of the wig should be appropriate, and the location of the wigs should be exactly consistent with their own sideburns

    3. Match your skin tone to make the wig feel comfortable.

    4. Non-professional personnel of simulation hair products should not use hair dryer to avoid hair damage.

    The wearing of wigs has nothing to do with their hair style or hair color, so anyone can try wearing wigs. Fashionable wig serves as the gens new force of hairdressing articles. No matter long hair, black hair, red hair, as long as wearing a wig and clothing, makeup harmonious match, will make you increase the beauty and confidence.

     

    How to wear wig products

    1 will wig bangs ahead of time, two ears with the thumb and ring finger pinched, index finger and middle finger fixed elastic, from front to back will wig wear.

    2. Adjust your wig to the best condition, with your ears aligned and the front edge of the net aligned with your forehead hairline, until the wig fits your head perfectly and there is no tightening or loosening sensation.

    3. Use a comb to create your desired hairstyle. Insert the comb diagonally into your hair, turn it outward to increase volume and volume, and flick the ends of your hair with your fingers for a more natural look.

    4. According to the different products, you can pick out your bangs, hair and sideburns with a sharp tail comb, so that your wig and your hairstyle can be completely integrated into the best place to wear the wig

    When choosing a wig, the first step is to make the size of the wig equal to the head circumference of the wearer. Too small pressure, affect the blood circulation of the head, resulting in headache, dizziness and other phenomena; Too large, lack of security, on the basis of the appropriate model, depending on the width of the forehead, it will be worn in an appropriate position. Wide forehead, the court is longer, when wearing the edge of the wig slightly down, with a certain amount of hair curtain as a foil; Narrow FOREHEAD, GO UP COURT SHORTER, WHEN MATCH WEARS, THE EDGE OF WIG IS SLIGHTLY UPWARD, BUT UNFAVORABLE TOO UPWARD, LEAVE A FEW HAIR SHADE TO MAKE FOIL.

     

    Washing method of wig products

    1. Comb the hair before washing (gradually dredge the hair from the end, otherwise it may damage the hair).

    2. Turn the cap over before washing.

    3. Pour an appropriate amount of neutral shampoo into warm water (about 20°C) and stir well. Soak the product in water for 5 minutes, rub it gently and rinse with water.

    4. Pour proper amount of hair conditioner into warm water and stir well. Then soak the product in water for 10 minutes and rinse it with clean water.

    5. Gently beat the water with a towel, or gently shake off the water and comb the hair naturally, and place it in a ventilated place to dry naturally.

    6. Finish the product after the hair is completely dry.

     

    How to maintain wigs

    1. The combing should be light. Wig cover should be combed before use, after wearing a wig cover to comb slightly on it. Comb wig generally choose sparse comb is better, comb hair to use oblique combing method, can not be straight comb, and the action should be light.

    2. Don't use bobby pins. Some people like to hold their wigs in bobby pins to prevent the wind from blowing them off. However, don't clamp your hair too hard. Otherwise, easy to hook bad wig net cover. Accordingly, HAD BETTER NOT USE HAIRPIN, CAN USE ADORNMENT SEX HAIR BAND TO FASTEN HAIR ON WIG.

    3. Do not twist with hands when washing. Often wear hair cover, generally two or three months washing is appropriate. Before washing, comb the wig with a comb and then rinse it with a diluted conditioner solution. Cut can not be wrung with both hands, but can not wash the false foam in the washing liquid. And APPLY BOTH HANDS gently THE foam above THE DIRECTION OF smooth HAIR silk to drift net, AIR dries NEXT, AVOID by all MEANS INSOLATE BELOW THE SUN.

  • Posted on Friday, 29 July 2022

    Use of wig care solution:

    With the popularity of wig slowly also drove the use of a wig detailer, many fake the wearer is also very concerned about how to use a wig detailer, actually wig detailer use method and the use of the hair care liquid is no difference, usual time how we care your hair, wig care fluid used is the same.

     

    When we comb the wig is the use of wig care solution, the wig has a matching use of non-oily wig care solution, evenly spray the wig care solution before and after the wig on the wig cover, really a wig set of wetting degree to about 80% later can comb the wig smooth.

     

    The following are to introduce the use of wig care solution:

    1 wig care solution generally spaced two to three days spray once, can make the wig more smooth and beautiful.

    2 wigs in the use of washing before, first from the top to the bottom of the use of coarse teeth soft brush or thin teeth of the wooden comb slowly combing, must first comb the dirt and dust above the wig clean.

    3. Prepare for warm water, the water temperature is about 25 to 30 degrees Celsius, integrate the detergent in warm water, put the wig in warm water, then put the wig on the water soak for 10 minutes, rinse hands slowly, after rinsing, stick with wig on objects with a comb, paying special attention to is that a no-no in water and knead the wig, lest stimulate, or to send.

    4. After soaking, rinse with water to clean the wig, and then soak the wig care essence for ten minutes, and then rinse with water

    5. After rinsing, use a towel to scrub the moisture on the wig slowly, find a ventilated place to hang the wig to dry, and then use curling iron to fix or blow the hair.

     

    Points for attention:

    Efficacy of wig care solution: 1. Wig care solution contains protein nutrients and active hair care formula, which is very useful for preventing hair from tying and producing static electricity, and can also make hair combing more smooth and smooth. 2, after use, the wig is smooth, more natural, restore luster and elasticity, prevent frizziness. 3, wig care solution after use, easy to comb, anti-static, prolong the service life of wigs.

Leave a Reply

Blog Categories